Accessories配 置
CN2(double crankshaft precision weld structure presses)is suitable for the wide metal sheet cutting holepunching and bending, such as cover of motor, partsof automobile, household appliance, outer cover of computer, bottoms of recorder and misic equipment,base of power supplying apparatus. Its wide baseplate and open-mouth is not only having advantage for single engineering and multi-engineering operation and is also easy to be matched for secondary and triple automatic conveying device or servo transmission mechanical hand equipped , so can get the target for automatic feeding.
● High rigidity
High-rigidity, high-precision, broad working-table frame, with welded steel board and heat treated, eliminated inner tension of press.
●Safe and reliable operation
High-sensitive clutch/braking added international top double electromagnetic valve and overloading protection device, can guarantee the accuracy and safety for sild board running and stopping. the precision of machine adjusting is up to 0.1 mm,safer and quick in production adjustin
● High-precision
the abrasive sections of crankshaft,gear, gearshaft are treated by hardening heat treament and followed milling processing, with high abrasion resistant and balance performance, as well as stable performances.Ensure quality and using life of punch. ●Automatiztion processing
closing-style electric circuit design, can equip all automatic feeders for automatization production.
●Environment-friendly , energy-saving
Attractive appearance, low noise, low consumption, save energy, relected the advanced design ideas by smooth and simpliication appearance.
Accessories配 置
配 置 | Accessories | Standard 标准 |
油压式过载保护装置 | Hydraulic Over-load Protector | ○ |
电动式滑块调整装置 | Slide Adjust device | ○ |
电动式模高指示器 | Die Height Indicator | ○ |
滑块及模具平衡装置 | Balance device | ○ |
电子凸轮开关 | Rotary cam Switch | ○ |
曲轴角度速度显示器 | Crank Angle Indicator | ○ |
电源插座 | Power Supply | ○ |
计数器 | Electrical Stroke counter | ○ |
预裁计数器 | Preset counte | ○ |
预断计数器 | Preset counter | ○ |
空气源接头 | Air source Receptacle | ○ |
二度落保护装置 | Over-run Safety device | ○ |
维护工具及工具箱 | Maintenance tool Box | ○ |
使用说明书 | Operation manual | ○ |
配 置 | Accessories | Optional 选配 |
电动式黄油润滑装置 | Grease Pumb | ○ |
气压模垫装置 | Pneumatic die cushion device | ○ |
变频器 | Inverter | ○ |
脚踏开关 | Foot Switch | ○ |
快速换模装置 (举模器、夹模器或移模臂) | Quick die change device (die lifter, clamp And die Arm Sepjes ) | ○ |
滑块上部打料装置 | Slide Knock-out device | ○ |
误送检测装置 | Misfeed detection consent | ○ |
防震脚 | Anti-Vibration Press mount | ○ |
光电保护装置 | Photo-electronic Safety device | ○ |
送料机(空气、机械及NC各类) | Feeder | ○ |
料架 | Uncoiler | ○ |
矫平机 | leveler | ○ |
机械手 | Robot | ○ |
模具照明装置 | Die Room light | ○ |
Technical Parameter技术参数
机种 | MODEL | CN2-110 | CN2-160 | CN2-200 | CN2-250 | |||||
型 式 | Item | S | H | S | H | S | H | S | H | |
吨 数 | capacity | ton | 110 | 160 | 200 | 250 | ||||
能力发生点 | Rated tonnage point | mm | 5 | 3 | 6 | 3 | 6 | 3 | 7 | 3.5 |
行程长 | Stroke length | mm | 180 | 110 | 250 | 130 | 250 | 150 | 280 | 170 |
行程数 | Stable speed | s.p.m | 35-65 | 50-100 | 30-55 | 40-85 | 25-45 | 35-70 | 20-35 | 30-60 |
最大模高 | die Height | mm | 400 | 435 | 450 | 485 | 500 | 550 | 550 | 605 |
滑块调整量 | Slide Adjustment | mm | 100 | 100 | 120 | 120 | ||||
台板尺寸 | Bolster Area | mm | 1800×650×130 | 2000×760×150 | 2400×840×170 | 2700×900×170 | ||||
滑块板尺寸 | Slide Area | mm | 1400×500×70 | 1600×550×70 | 1850×650×95 | 2100×700×95 | ||||
主马达 | Main Motor | HP×P | VS15×4 | VS20×4 | VS25×4 | VS30×4 | ||||
供给气压 | Air Pressure | 2 kg/cm | 6 | 6 | 6 | 6 | ||||
精 度 | Presses Precision | GB(JIS) 1 clASS 1级 | ||||||||
模垫型式 | die cushion capacity | One pad & two cylinders 一板双缸 | ||||||||
能 力 | Capacity | ton | 3.6×2 | 6.3×2 | 10×2 | 14×2 | ||||
行程长 | Stroke length | mm | 70 | 70 | 80 | 100 | ||||
模垫顶板面积 | Die Cushion work part dimension | mm | 860×235 | 1250×260 | 1500×350 | 1650×470 |
机种 | CN2-110 | CN2-160 | CN2-200 | CN2-250 | |
台板面积(左右x前后) | 1800×650 | 2000×760 | 2400×840 | 2700×900 | |
T型槽型番 | A | A | B | B | |
T型槽条数 | 6 | 8 | 8 | 8 | |
b1 | 375 | 375 | 375 | 450 | |
b2 | 125 | 125 | 125 | 150 | |
b3 | 320 | 520 | 710 | 680 | |
b4 | 430 | 520 | 520 | 540 | |
b5 | 255 | 415 | 455 | 510 | |
圆形三、四 | 模垫销孔数目×孔径 | ||||
销孔间距cxd | 75×100 | 75×75 | 100×100 | 100×100 |
机 种 MODEL | CN2-110 | CN2-160 | CN2-200 | CN2-250 |
滑块板面积(左右x前后)Slide Plate Area(lRxFB) | 1400 x 500 | 1600 x 550 | 1850 x 650 | 2100 x 700 |
T型槽型式type of t-Slot | A | A | B | B |
T型槽型式type of t-Slot | 4 | 6 | 6 | 6 |
b6 | 375 | 375 | 375 | 450 |
b7 | 125 | 125 | 125 | 150 |
MODEL | A | B |
a | 22 | 28 |
b | 37 | 28 |
c | 24 | 28 |
d | 16 | 20 |
r | 1 | 1 |
机种 | CN2-110 | CN2-160 | CN2-200 | CN2-250 | ||||
形式 | S | H | S | H | S | H | S | H |
AA | 2000 | 2200 | 2620 | 3000 | ||||
AB | 1900 | 2080 | 2460 | 2800 | ||||
AC | 1360 | 1520 | 1820 | 2200 | ||||
AD | 1800 | 2000 | 2400 | 2700 | ||||
AE | 1510 | 1660 | 1990 | 2220 | ||||
AF | 1400 | 1600 | 1850 | 2100 | ||||
AG | 1780 | 1980 | 2320 | 2590 | ||||
BA | 1745 | 1940 | 2235 | 2545 | ||||
BB | 1295 | 1380 | 1885 | 2195 | ||||
BC | 650 | 760 | 840 | 900 | ||||
BD | 330 | 385 | 425 | 455 | ||||
BE | 500 | 550 | 650 | 700 | ||||
HA | (630) | (730) | (790) | (820) | ||||
HB | 830 | 865 | 990 | 1025 | 1070 | 1120 | 1100 | 1155 |
HC | 400 | 450 | 500 | 550 | ||||
HD | 180 | 110 | 200 | 130 | 250 | 150 | 280 | 170 |
HE | 3059 | 3709 | 3849 | 4304 | ||||
HF | 1240 | 1440 | 1570 | 1680 | ||||
φh | φ35 | φ47 | φ54 | φ54 |
PRODUCTS
- CN1 High preeision Compact power press
- CH1 Series High speed Precision Compact Power pres
- SN1 Series Semi-Straight Side High Precision press
- CN2 Series Donble Crank press
- TNX STRAIGHT Side Double Crank press
- TN1 Series Colunar Straight single crank press
- TK1 Toggle press
- TN2 Two-point press
- TN4 Four-point press
- TH2 closed type high speed precision press
- SH1 series of semi closed type high precision high-speed punch
- SL1 series of semi closed type high precision connecting rod punch
- TH1 closed high precision high-speed punch
- Single Crank Precisionsteel Frame Press